Dealing with issues related to the washer drum can be frustrating, but many problems can be resolved with a bit of DIY knowledge. In this guide, we’ll cover common washer drum repair and issues, such as imbalance, excessive vibration, and unusual noises. By following these step-by-step instructions, you can troubleshoot and fix these problems efficiently.
Common Washer Drum Issues and DIY Washer Drum Repair
Drum Imbalance
An imbalanced drum can cause the washer to shake excessively and may even lead to damage over time. Here’s how to address it:
Check for Overloading: Overloading the washer can cause an imbalance. Make sure you’re not putting too many items in the drum. If you’ve overfilled it, redistribute the load or remove some items and run a shorter cycle.
Ensure Level Placement: An unevenly placed washer can also lead to drum imbalance. Use a level tool to check if the washer is properly balanced. Adjust the washer’s feet if necessary to level it on the floor.
Inspect Suspension Springs: The suspension springs in the washer help absorb vibrations. If these springs are damaged or loose, they may need to be replaced. Check the springs and tighten or replace them as needed.
Excessive Vibration
Excessive vibration during the spin cycle can be disruptive and may indicate underlying issues. Here’s how to tackle it for washer drum repair:
Check the Washer Feet: Ensure the washer feet are properly adjusted and securely in place. Misaligned or loose feet can cause excessive vibration. Adjust the feet to level the washer and reduce vibrations.
Examine the Shock Absorbers: Shock absorbers help control the drum’s movement during the spin cycle. If they are worn out or damaged, they may need to be replaced. Locate the shock absorbers (usually found at the base of the drum) and check their condition.
Verify Load Distribution: Unevenly distributed loads can cause the drum to vibrate excessively. Make sure to load the washer evenly to prevent vibration during the spin cycle.
Unusual Noises
Unusual noises, such as banging, squealing, or grinding, can be a sign of various issues. Here’s how to diagnose and fix these noises:
Inspect for Foreign Objects: Small items like coins or buttons can get caught in the drum or pump. Check the drum and the pump area for any foreign objects and remove them if found.
Check the Drum Bearings: Worn or damaged drum bearings can cause grinding or rumbling noises. If you suspect bearing issues, you may need to replace the bearings. To access them, remove the drum and inspect the bearings.
Examine the Drive Belt: A squealing noise may indicate a worn or loose drive belt. Check the belt for wear and tear and replace it if necessary. Ensure the belt is properly tensioned for optimal performance.
For more complex washer drum repair or if you’re unsure about performing these repairs yourself, professional help is available. Visit our washer repair services at Surrey Appliance Service Pros for expert assistance.
